Is Blue Marble® 2-Cycle Oil a synthetic oil?
No, Blue Marble® 2-Cycle Oil is a highly refined pure mineral oil, which
contains our proprietary patented technology that differentiates us from other
oils whether they are synthetic or mineral. For more information on oils please
refer to the January 2004 article by Off-Road.com, which can be found in the
“News/Articles” section of the Blue Marble® website.
--
Is Blue Marble® 2-Cycle Oil safe for
injectors?
Yes, it is completely safe for all fuel injected and premix engines.
--
When using Blue Marble® 2-Cycle Oil for the
first time do I need to drain my oil reservoir?
Yes, we strongly recommend that you drain the vast majority of your old oil out
of your reservoirs first, making sure that you don’t get air into the lines and
loose your prime. If there’s a small amount of the older oil in the very bottom
of the reservoir as well as your injector lines it should be fine. By draining
as much of the other oil as possible, you will get the benefits that Blue
Marble® has to offer more quickly.
--
Is it okay to mix Blue Marble® 2-Cycle Oil
with other oils (synthetic or mineral)?
We don’t recommend doing this if possible, especially the first time that you
use it. If you happen to run out of Blue Marble® at some point, and you have to
use another brand of oil, it can be added to Blue Marble®; however, the benefits
from Blue Marble® will likely diminish (almost completely) with that first use
of the mixed tank.
--
Will Blue Marble® 2-Cycle Oil work in my sled,
boat, dirt bike, jet-ski, etc?
Yes, Blue Marble® will work just fine in any 2-stroke engine, whether it is fuel
injected or premix.
--
Is it okay to use Blue Marble® during the
break-in period?
Yes, you can break an engine in using Blue Marble Oil®.
--
Will Blue Marble® 2-Cycle Oil void my
warranty?
The federal law called the “Magnuson Moss Warranty Act of 1974” states that no
manufacturer can require you to use their components (oil, etc.) to maintain the
factory warranty unless they provide, at no charge during the said warranty
period, such product free of charge. Most manufacturers state that the oil you
use must meet or surpass the equivalent of some specific testing procedure
(i.e., TC-W3®, JASO, etc.). Blue Marble® High Performance 2-cycle oil meets or
exceeds the specifications of JASO FC, TC-W3®, and ISO EGD.
--
What is the recommended mix ratio for Blue
Marble® 2-Cycle Oil?
Follow you engine manufacturer’s mix recommendation.
--
What is the pour point for Blue Marble®
2-Cycle Oil?
Blue Marble® High Performance 2-Cycle Oil, specially formulated for high
performing machines, has a pour point of negative fifty degrees Fahrenheit (-50°
F).
Mend-It
Glue
Bill
Dance Fish Attractor
